Remote Oil Filter & Cooler

Improved Racing's Ford Modular V8 remote oil filter adapter allows you to relocate your oil filter to a more practical location (most commonly the front bumper) as well as accommodating the optional addition of oil cooler.
This bolt-on adapter replaces the factory oil filter and water inlet manifold. It has two 1/4" NPT ports (post filter) and one 1/8" NPT port (pre-filter) for factory sensor, aftermarket sensors or oil line feeds. The front-facing 1/4" NPT port is directly compatible with the factory oil temp sensor.
The engine oil ports are -10AN O-ring boss ports while the water port is a -16AN O-ring boss port. Factory radiator hoses of 1.5" and 1.75" are supported, as well as the option to use a -16AN adapter fitting for the engine's water inlet. Oil line adapters are available for -8AN, -10AN, and -12AN lines.
This adapter will fit any Ford Modular V8, however applications with a curved water neck on the factory manifold, such as the SN95 1996-2004 Ford Mustang GT, require Improved Racing's EFR-800 radiator hose. When selecting this optional radiator hose, you must also select the 1.75" hose barb adapter in the drop down. These two options make this filter relocation adapter a completely bolt on solution for the SN95 1996-2004 Mustang GT. Applications with a straight water neck on the factory manifold may reuse the factory radiator hose with minimal or no trimming required. Fitment Note: 
The optional silicone radiator hose may not clear aftermarket turbo headers. A tight radius 90-degree -16AN adapter fitting and a custom radiator line may be required for these applications. We do not currently offer such a fitting. Features and Benefits

Replaces the factory oil filter and engine water inlet manifold, allowing for a remote oil filter setup and/or the addition of an oil cooler.

Two 1/4" NPT ports for sensors or turbo oil feed line

-10AN (JIC/SAE) straight thread O-ring ports for oil lines

-16AN (JIC/SAE) straight thread O-ring port for engine water inlet

CNC-machined 6061-T6 billet aluminum construction with MIL-A-8625 Type II black anodized finish

Lifetime Warranty

Made in the USA

Optional Oil Port Adapters Available in -8AN, -10AN, or -12AN Optional Waterneck Barb Fittings Available for 1.5" and 1.75" Radiator Hoses Includes

1x Remote oil filter adapter block

1x Bonded Rubber Gaskets for 1996-1999 blocks engine blocks

1x Bonded Rubber Gaskets for 2000-2014 blocks engine blocks

4x Zinc-plated steel mounting screws

1x 1/4" NPT plug with thread sealant

1x 1/8" NPT plug with thread sealant

Applications

All Ford Modular V8 engines including the 1996-2010 Mustang GT, 1995-2010 F-Series trucks, 1992-2012 Crown Victoria / Mercury Grand Marquis, 1990-2011 Lincoln Towncar, 1996-2014 E-Series vans, 1997-2014 Expedition, 2000-2005 Excursion, 1998-2014 Lincoln Navigator, and others.

Note:

 If the water neck on your factory filter mount is curved (1996-2004 SN95 chassis Mustang GT) you must select the optional radiator hose and 1.75" hose barb adapter for a direct bolt-on installation. 2005-2010 Ford Mustang GT's may reuse the factory radiator hose but must select the optional 

1.5" hose barb adapter

.

1996-2002 Cobra and Mach 1 trims require an optional 1.75" to 1.50" radiator hose reducer, part number RHR-175-150. The EFR-800 silicone radiator hose may be used but must also be trimmed for these applications.

Note:

 2003-2004 Ford Mustang "Terminator" Cobra will require a custom radiator hose with double 90-degree bends to connect the factory thermostat housing to the EFR-100 adapter.

In some cases, this adapter can provide enough clearance for forward facing turbo manifolds when used with our EFR-800 silicone radiator hose. The diagram below shows the amount of clearance provided for manifolds and exhaust headers when using EFR-100 with EFR-800:

Optional Parts Sold Separately SN95 Mustang Radiator Hose for Aftermarket Oil Cooler Adapters
This hose is required
for applications with a curved water neck on the factory manifold, unless using AN lines for a radiator hose. Use with the 1.75" hose barb adapter fitting, part number OB-16-28. Part Name Part Number Oil Filter Relocation Radiator Hose EFR-800 Cobra/Mach 1 Radiator Hose Reducer
This hose reducer is required
for SVT Cobra and Mach 1 trims. Size Part Number 1.75" to 1.5" Radiator Hose Reducer RHR-175-150 Water Neck Adapter Fitting (Optional)
Select a water neck adapter fitting size, SN95 1996-2004 Ford Mustang GT requires 1.75'' Size Part Number Qty Required 1.5" Hose Barb OB-16-24 0-1 1.75" Hose Barb OB-16-28 0-1 -16AN Male Flare OM-16-16 0-1 Line Adapter Fittings (Optional)
Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Select the adapter fittings according to your oil line size (-10AN is recommended) Note:
Our fittings are required to guarantee compatitility with our products, as some aftermarket fittings may cause interference and improper function. Line Size Part Number Qty Required -8AN OM-10-08 0-2 -10AN OM-10-10 0-2 -12AN OM-10-12 0-2

Returns Accepted for this item if it's within 14 Days