Cooltech Mustang Boss 302 Road Race Oil Cooler
Kit Remote Filter Thermostat 10an
USD $765.00
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Cooltech Mustang Boss 302 Road Race Oil Cooler Kit Remote Filter Thermostat 10AN
This is air to oil cooler that has been designed for the 2012+ Boss 302 and 2011+ Ford Mustang GTs. This Oil Cooler Kit is intended for both street and track driven Mustangs. The kit also increases engine oil capacity by approximately 1.2 quarts - further aiding engine cooling and oil life longevity.
The "coyote" engine in the Mustang GT's and Boss 302's employs a high performance oil pump. Oil pressure at start up is often over 90psi. Even when fully warm, oil pressures can exceed 80 psi at max rpm. It is important that a high-performance heat exchanger is used. Cool Tech consulted with Setrab in selecting a cooler that was large enough to get the job done AND that had the best flow and least pressure drop of virtually any cooler on the market. This Setrab cooler was originally spec'd to meet NASCAR requirements and now often used on Porsche race cars. The trade-off is that this is NOT an inexpensive cooler. The street price of the cooler alone is $600+. Similarly, Cool Tech uses other very high performance components including nickel plated -10 AN fittings.
Unique Features:
Complete Kit! - Engineered exclusively for the Ford Mustang
Quality Materials - All top-end components from the cooler to the lines & fittings.
Cool Tech's Oil Cooler Kit Includes:
Setrab 72 row single pass Oil Cooler
Thermostatic remote oil filter adapter
-AN 10 lines & nickel plated fittings
Mounting brackets & hardware
Extras: OEM Setrab cooler mounting brackets for optional mounting position and extra cooler tab reinforcements.
Please Note: The remote oil filter adapter has 3/4”-16 threads. Requires FL400S filter or similar size/thread.
Depending on a year & model, buyer will need to purchase a specific block adapter with 10AN fittings to run this oil cooler kit. 5.0 Coyote and other block adapter can be sourced from Ford Performance or other aftermarket manufacturers such as Moroso, Earls, Setrab, Mishimoto, Canton etc. This kit was originally used on S197 Mustang, However it will fit classic Mustang all the way to Foxbody, SN95, S197, and s550 chassis by using different hose length and block adapter. Very nice kit in excellent working condition. Prefect for HPDE track car. Retail for this kit was $1495 from Cooltech. Please see photos for condition.
Shipping: Fully insured with signature requirement.
This is air to oil cooler that has been designed for the 2012+ Boss 302 and 2011+ Ford Mustang GTs. This Oil Cooler Kit is intended for both street and track driven Mustangs. The kit also increases engine oil capacity by approximately 1.2 quarts - further aiding engine cooling and oil life longevity.
The "coyote" engine in the Mustang GT's and Boss 302's employs a high performance oil pump. Oil pressure at start up is often over 90psi. Even when fully warm, oil pressures can exceed 80 psi at max rpm. It is important that a high-performance heat exchanger is used. Cool Tech consulted with Setrab in selecting a cooler that was large enough to get the job done AND that had the best flow and least pressure drop of virtually any cooler on the market. This Setrab cooler was originally spec'd to meet NASCAR requirements and now often used on Porsche race cars. The trade-off is that this is NOT an inexpensive cooler. The street price of the cooler alone is $600+. Similarly, Cool Tech uses other very high performance components including nickel plated -10 AN fittings.
Unique Features:
Complete Kit! - Engineered exclusively for the Ford Mustang
Quality Materials - All top-end components from the cooler to the lines & fittings.
Cool Tech's Oil Cooler Kit Includes:
Setrab 72 row single pass Oil Cooler
Thermostatic remote oil filter adapter
-AN 10 lines & nickel plated fittings
Mounting brackets & hardware
Extras: OEM Setrab cooler mounting brackets for optional mounting position and extra cooler tab reinforcements.
Please Note: The remote oil filter adapter has 3/4”-16 threads. Requires FL400S filter or similar size/thread.
Depending on a year & model, buyer will need to purchase a specific block adapter with 10AN fittings to run this oil cooler kit. 5.0 Coyote and other block adapter can be sourced from Ford Performance or other aftermarket manufacturers such as Moroso, Earls, Setrab, Mishimoto, Canton etc. This kit was originally used on S197 Mustang, However it will fit classic Mustang all the way to Foxbody, SN95, S197, and s550 chassis by using different hose length and block adapter. Very nice kit in excellent working condition. Prefect for HPDE track car. Retail for this kit was $1495 from Cooltech. Please see photos for condition.
Shipping: Fully insured with signature requirement.
Price type
IN STOCK
OUT STOCK
.
