3/8 Fuel Line Braided 6an 10ft Transmission Cooler

Product Description:
Size: AN6
Length:3 Meter / 10 ft
Inner hose: CPE synthetic rubber
The middle layer: 304 stainless steel wire mesh sleeve
The outer layer: High-quality Nylon Braided
Maximum Working Pressure (psi): 500 psi
Bursting Pressure(psi): 2000psiHose Inner Diameter: 0.34inch (8.71mm)
Hose Outside Diameter: 0.56inch (14.22mm)
Operating temperature:-104ºF to +250 ºF/-40ºC to +120ºC
Features:
Polished and anodized for bright appearance and corrosion protection
Removable head for both push-on or twist-lock application
Application: Universal Brake Lines, Clutch Lines, Fuel Systems, Turbo oil feed Hose, Coolant Systems, Oil Pressure Systems, Gauge lines & Power Steering.
Compatibility: Brake Fluids, Unleaded Petrol, Methanol, Water, & Oil. Ideal for use with Unleaded fuel
How to install
1. Wrap masking tape over the area to cut to ensure a nice clean cut and prevent the braid from unraveling.
2. Clean cut the hose and clean away debris.
3.Clamp the fitting socket into the vise and insert the hose into the socket
4.Apply lube to the nipple
5. Start hand threading the socket down onto the fitting. Be careful not to strip the threads when starting. Tighten the initial threads by hand being careful not to strip the threads when starting.
6.Once the hose goes over nipple tighten using an adjustable wrench.
Note:Professional Installation is Highly RecommendedInstallation Instruction is NOT Included
Nylon Braided CPE Hose vs Nylon Braided PTFE Hose
PTFE hose holds up a lot stronger to heat and extreme circumstances than the CPE hose.
The flexibility of CPE hose is better than PTFE hose, PTFE hose relatively hard.
✅HIGH QUALITY MATERIAL - The high pressure fuel line covered with high quality woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance.
✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.
✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance.
✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes it easier to install. It also results in more fluidity in transmission.

Returns Accepted for this item if it's within 30 Days